Aims

Austenitic chrome steel is watched that higher capacity of usage resistance confine can be discovered due to three most much of the time utilised austenite stabilisers. Deterioration is an electrochemical machine and it’s far related a vague law from a couple of various electrochemical reactions. Besides, crumbling can incite devastating of metal shape and spoil. Right while the same electrochemical circumstances has been utilized, the naughtiness reason to the latent film in 3-body scratched spot crumbling can be affected with the guide of various interrelated factors, as an occasion stack related at the particles, rehash of iota surface interests, confine of the uninvolved motion picture at the heap bearing, hardness of counter face and particles. Exactly when grinding particles exist because of the 1/3 body and continue to be in the touch region, they are able to alternate the mechanical response of the structure with the aid of favouring a sliding movement amongst accomplices, by going approximately as an unpleasant expert boost towards polishing off it seems that “harsh wear”. For that condition, while four differing scratched variety particles have been used because the 1/3 frame, it’ll involve fruition 4 unmistakable mechanicals respond. In three-frame scratched region disintegration, the exactness and the hardness of the grinding particles are fundamental in this audit.

Breaking down utilisation appears while a steel piece is placed inner a ruinous recreation plan and the found out the surface of the steel revel in influencing of particles. Due to the mischief of the surface with the aid of influencing of a particle in the unfavourable route of movement, the rate of debasement will quicken. Of route, scratched spot usage is the debilitating finished by way of orbited ruinous fluids and mix with another stable degree. This survey seems into the outcomes of atom bold fine on the tribe-electrochemical direct of 316L chrome steel below low-push 3-frame abrasion–corrosion conditions. Differing accuracy debris had been passed directly to the interface between the cases and a turning bendy counter face, while adjustments in modern-day with time had been potent IO statically checked. In light of an instantly courting existed between tribological components (load and pace) and the standard current constructed up, an observational association is proposed and feasible shrouded frameworks are inspected. The results of atom sauciness before everything appearance and sub-surface mischief are moreover shown. It turned into found that developing particle dashing high-quality improved their passivation profitability.

Literature Reviews

The motivation behind this exploration meander is to research and study the impact of particle dashing on low-increase three edges scratched district breaking down of stainless-steel 316L. The destinations of this exploration are:

• To test and take a gander on the impact of particle sauciness on low-push three frames scratched spot usage of stainless-steel 316L beneath two exclusive loads that are 0.5N and a couple of 0.0 N.
• To test and take a gander at the impact of atom bold best on low-push 3 body scratched territory disintegration of chrome steel 316L on identical dust counter face however with four specific grinding particles.

The tribe-electrochemical test will contain six tests to hold the consistency:

1. The electrolyte may be a salt-water blend.
2. The reference and counter cathode could be the equal in all checks.
3. The rotating counter-face may be one cloth in all checks.
4. The related load will be identical on all checks.
5. The unessential pace could be identical in all exams.
6. Same flow rate for the Peristatic Pump.

Corrosion is a word that is gotten from the Latin word corrode, which infers nibble away. According to Fraunhofer, utilization can be portrayed as the hurting attack on a steel question with the aid of which include the condition and it is the maximum generally perceived the form of the electrochemical phenomenon. In the business area, disintegration goes approximately as an extreme trouble as it can weaken metal structures, cause frustration of plant operation and defilement of system liquors. Corrosion is called a well-known trouble, in this manner; it was visible as the difficulty that cannot be avoided. Regardless of the way that is key to don’t forget disintegration resistance of various substances at, to begin with, but the maximum essential issue is to remember the additives that add to utilization. They observed that chloride and chloride compound assertion was the purpose that delivered on the mistake of ground exhaust, through putting corrosion. Energy Dispersive Spectroscopy exam and Scanning Electron Microscopy had been used by them to take a gander at the utilization pits. In the call for of metal utilization, there are four reference terminals the cutoff of that is of tremendous significance. The first is the hydrogen anode, the everyday hydrogen terminal, the estimations of that is important no extra reasonable in estimation control, the second is the copper-copper sulfate cathode, the 1/three is calomel, normally the soaking wet calomel terminal, and the fourth is silver-silver chloride terminal that’s installation for some testament altogether less centrality, but as it’s far apart from commonly used. There are, in light of modern-day situations, endless extra reference cathodes, near to those strains; or three words can be targeted around the one’s anodes, what is greater.

Wear issues takes place in various parts used in daily life, mainly in corporations and commercial enterprise wanders which fuse metal undertakings, automobile creators, oil associations, railroad associations and truly in any area in which correspondence of shifting surfaces is included. Wear imply the loss of materials where a stable floor has continued via diligent mischief. According to Meozzi, the wear and tear ponder which happens on the system parts can be watched and controlled by special parameters, for instance, mass, geometrical estimations, weight, and volume.

Grinding wear occurs at something factor a stable query has been stacked in opposition to particles of substances that have an equivalent or more big hardness. Toward the day’s stop, harsh wear happens while a hard floor circulates over a same or milder floor under weights. As validated via Kato and Adachi, harsh wear is the not on time result of sliding particles, where a specific whole quantity has is ousted from the weaker surface, moulding a grinding dejection. Figure 1 underneath reveals the ejection of the materials and a rating has been encircled.

 

Figure 1: Abrasive Wear 

Unpleasant wear can be moreover confined into two simple modes which can be -body and three-frame scratched territory wear. Two-frame grinding wear incorporates affiliation among our bodies, where one frame will persevere through the wear and tear and the alternative frame with harder floor be the counter-defy body. Figure 2 beneath show off a layout of the two-body model. The Body 2 perseveres thru the damages whilst Body 1 is stacked, that is an instantaneous result of the transmission of power from Body 1 and Body 2.

 

Figure 2: Two-Body and three body Mode of Abrasive Wear 

Because of three-frame harsh wear, corn supper that is normally referred to as Body three has been considering. In 3-body abrasive wear, the girts are allowed to roll transparently, sliding over the surface considering that they aren’t held firmly. As showed up in Figure three beneath, Body three is organised between Body 1 and Body 2 with rolling and sliding motion.

Erosive put on incorporates a pair wear segments which are usually laid low with the fabric of particle, the fringe of impingement, impact of pace and the degree of the atom. Influencing of an atom of strong or liquid in opposition to the floor of a question can be referred to as erosive put on. A tolerable case is the damages of the turbine the front traces of a service. The sharp edges of a aircraft could have an effect with the smooth cloud even as having a flight. The plane is a common condition in which the effect on the edge is realised by using little debris. This is known as breaking down put on. Right while a particle is tough, solid and goes to the floor with the low edge of impingement, there might be excessive believability that it will realise grinding put on. This showed up in Figure four. The edge of the disintegrated floor and the technique for atom earlier than impact is referred to as fringe of impingement. Figure 5 simply outlines the breaking down of surface take place in mild of impingement purpose of an atom. The speed of the atom, the length of the ugly and the impact point chooses the level of erosive wear. Crumbling wear on excessive obsession, fly red warm flotsam and jetsam slurries, they used a metallic put on the piece and a changed version of pot analyser which organised to keep high amassing of slurries. They located that the centralization of slurries has a greater unmistakable impact than the relative pace and every unusual merging of slurries has their most outrageous breaking down the price at distinct precise focuses. The particles in the slurries may be depicted as meagre debris influencing in opposition to the metallic put on the piece as a mechanical section.

Tri biocorrosion was taken into consideration approximately the substances residences, surface adjustments and electrochemical reactions with contact and put on. Research turned into done at the effect of critical manner parameters at the rate of material degradation inside the field or tri biocorrosion. In other words, tri biocorrosion is an outcome of metal or non-metal fabric enhance closer to getting to be plainly degenerate due to mechanical touch in a ruinous environment. The tri biocorrosion practices of AISI 310 and AISI 316 chrome steel underneath responding to the sliding situation in 3.5% NaCl game plan. Mechanical get together they used is the ball-on-circle put on checking out tribometer is to take a gander at the disintegration capacity and usage contemporary thickness among two materials. They observed that the utilizations capability and disintegration modern-day thickness of 316 was decrease than 310. This is the distinctive feature of the passivation restrict of 316 is better. The coefficient amongst grinding and current densities has sturdy affiliation while both materials had been beneath sliding weights. Additionally, Wood (2010) communicated that tribocorrosion generally portrayed as two sorts of social occasions which can be deterioration utilisation and scratched spot disintegration.

As said some time currently, remembering the remaining objective to consciousness the tri biocorrosion lead, mechanical and disintegration responses from the tri biocorrosion test gadget are required to be assembled and watched. All around, tribometer has a workplace to gage the progression of frictional features and electrochemical approach is used to screen the disintegration response from the check machine. A schematic chart of the most important method of a tri biocorrosion take a look at shape is showed up in Figure 6. Electrochemical interfacing consists of a potentiostat and three terminal associations, for instance, reference cathode (RE, both SCE (trendy calomel anode) and SHE (widespread hydrogen cathode)) and counter terminal (CE, platinum twine or graphite bar). The case goes approximately as the working anode (WE). The selection of parameters depends on upon the utility and research interest. For instance, if there must be an event of an orthopaedic application, the impact of load or cycles is probably the parameter of the hobby. In dental application, the pH of the sports plan may want to accept a phase and might be inspected. The method to be used movements with the approach for the check machine All around, open circuit capability (OCP) estimations provide the development of ability and ability changes in the system with admire to traditional cathodes (e.g., popular calomel terminal, SCE). Help, the disintegration cutting-edge progression can be taken in at a long lasting potential from the device. In like manner, electrochemical impedance spectroscopy (EIS) can be used to fathom the houses or characteristics of films moulded at the contact quarter. For the maximum component such estimations are taken earlier and after that a while later the sliding or tribotest.

Erosion corrosion is an accelerating in the price of disintegration attack in steel because of the relative improvement of a ruinous fluid and a metal floor. The prolonged turbulence brought on by way of putting on the inner surfaces of a tube can obtain hastily growing deterioration rates and unavoidably a wreck. Breaking down utilisation can in like way be annoyed via damaged workmanship. For example, burrs left at cut tube terminations can hassle easy water circulation, purpose bound turbulence and high circulation speeds, realising deterioration disintegration. A combo of degradation and utilisation can incite to an extraordinary degree high placing prices. In toward the sea nicely structures, the approach commercial enterprise wherein sections come into touch with sand-bearing liquids, this is a basic difficulty.

In fundamental terms, breaking down usage augment the price of a strike on steel in view of its dangerous situation and prologue to mechanical wear manners. Mechanical portions which dedicated to crumbling disintegration are propellers, pump, turbine components, valves, spouts and system that can exhibit to liquid sputter or streams. As verified through Fraunhofer, metal misplaced as cations while deterioration disintegration happens, or metal may also outline a stable utilisation factor and do away with robotically a long manner from the floor by the spilling ruinous.

Materials choice count on a simple element in proscribing crumbling usage hurt. The alarm is all together whilst predicting deterioration utilisation direct on the begin of hardness. High hardness in a fabric does now not by any manner guarantee a bizarre country of impenetrability to deterioration utilisation. Design segments are similarly especially simple.

It is usually appealing to lessen the fluid speed and development laminar circulation; prolonged pipe widths are beneficial in this one in every of a kind circumstance. Unforgiving surfaces are usually unwanted. Plans making turbulence, movement restrictions and impediments are undesirable. Startling adjusts in move direction need to be kept up a key separation from. Tank immediately pipes should be facilitated a long manner from the tank dividers, closer to the middle. Welded and flanged pipe zones should constantly be meticulously balanced. Impingement plates of confounds expected to address the brunt of the mischief should be easily replaceable. The thickness of defenceless zones has to be extended. Replaceable ferrules, with a diminished, give up, may be mounted in the inlet aspect of heat exchanger tubes, to turn away harm to the certified tubes. A couple of everyday adjustments can be realised to restrain the risk of crumbling disintegration.

 

Figure 6: Erosion Corrosion on Metal Piece

Two-body and three-body scratched spot utilisations are each beneath the menial of tri biocorrosion. On the alternative hand, three-body appear when grinding debris exists and gotten among two in quantity our bodies in relative improvement. Exactly when grinding particles exist as the 1/3 frame and stay in the touch area, they can adjust the mechanical response of the device through inclining closer to a sliding movement amongst accomplices, through going about as a harsh administrator increase toward attending to be “grinding wear”. Utilisation handle going about as one of the elements in scratched variety disintegration. The usage can impact the sliding conditions, the participation amongst disintegration and disintegration will prompt a flight marvel of joint attempt.

While looking the extent of the synergism for every of the materials examined, it’s miles watched that the execution of the damage frameworks is undeniably associated with the forcefulness or organic impact at the fabric, in mild of the way that in the electrolyte of NaCl there are certain estimations of this parameter watched (Table 3). Playing out an unmistakable examination of the execution of instruments within the marine circumstance, it is watched that the cloth with the most hoisted synergistic impact is of carbon steel, even as the multilayer exhibit decreasing regards in line with the quantity of the multilayer. This impact is mainly an end result of the motion of the chloride molecule, for the reason that depolarization made inside the shape, propels limited usage wonders which advance in the direction of the substrate without turning into the impacted domain names, the edges added by means of the putting, lessen the measure of electrolyte contained in that. This end result reveals that the littler scale contraptions of wear are answerable for the closeness and progress of saved disintegration ponders and bolster a greater conspicuous clearing of the out of doors layers of the multilayer.

Differing jauntiness debris was surpassed directly to the interface among the illustrations and a rotating flexible counter face, at the same time as adjustments in modern with time has been potent io statically watched. In light of a straight relationship existed between tribological components (load and speed) and the everyday contemporary propelled, an observational affiliation is proposed and viable essential segments are discussed. The outcomes of atom jauntiness at first appearance and sub-floor mischief are moreover delineated. It turned into located that extending particle daring first-class upgraded their passivation functionality.

Electrochemical response is the oxidation of metallic debris to particles, in mild of the way that the substance reaction that carries time and trade of electron to electrochemically dynamic species in the electrolyte. The maximum usually perceived instance of electrochemical contemplate in little by little existence could be disintegration (Fraunhofer 1974). Right whilst electrochemical response takes place, the trading of electron may have the capability to gage and the exam of metallic disintegration can be proficient. Generally, oxidation half reactions is implied anodic reaction and diminishment 1/2 response is insinuated cathodic response. A case may be showed up below when disintegration of Iron (Fe) in Sodium Chloride Solution (NaCl).

Oxidation (Anodic Reaction)
Reduction (Cathodic Reaction)

At Cathode:  

At Anode:

 Figure 8: Iron Metal Undergoes Oxidation and Reduction

The build-up of chromium to the iron will upgrade the trustworthy satisfactory whilst forming a dormant film, while the degree of Chromium (Cr) is 12% or superior. Since the measure of chromium in chrome steel 315L are every in the volume of sixteen-18% in this way constrained film will outline perseveringly. A thin oxide company, the dormant movie with the limit of disintegration resistance which forms all of a sudden even as indifferent steel and blends touch with air or water in like the way of a thermodynamic weak spot of the essential metallic.

Stainless metallic surfaces are rendered withdrawn with the aid of the advancement of a floor movie that is an “impediment” to disintegration. This “obstacle” develops a direct, controlled regulate of anion and cation scattering transversely over it. This uninvolved layer contains

Essentially of chromium oxides, hydroxides and iron blends, which define at the farthest surface of the metal degree.

Beginning idle layer established order is professional via synthetic prescriptions, which clear far-flung contemplations and this is pretty recently the start open metal particles. This treatment overhauls the intense centralization of chromium, nickel and molybdenum (within the incidence of 316-audit chrome steel) on the surface of the steel degree. Through a dark segment, these 3 metals collectively impact the association of a more homogenous chromium oxide/squeeze oxide inert layer. The consistency and unfaltering high-quality of the movie will change dependent upon the methodology for treatment. Uninvolved layer thickness and soundness is crucial to shape lifestyles traverse and thing goodness. New chrome steel includes a sizable collecting of defilements, as it had been, given that a sizable degree of it is reused from lower survey mixes by using inclusive of materials, as an instance, chromium, nickel and molybdenum, amongst others to improve the glow/utilisation resistance of the metallic. In the midst of the reconstitution device, aluminium is in like way brought to deoxidize the “lessen” to lessening porosity. These contemplations ought to be eliminated from excessive faultlessness systems or utilisation will take place.

Another degradation a tremendous part of the time found in automatically cleaned stock is waiting for ugly cloth left on the floor from the mechanical finishing approach that moves earlier than electro polishing. This grinding cloth can contain up to 15% iron oxide, and might be extra fittingly named “Rouge pending” or “rouge initiator”. Another most cherished mechanical completing grinding is corundum or aluminium oxide. Since it is so tough, these materials get added in the stock surface and provide desires to first-rate putting to begin. To moreover confound matters, welding operations make a crystalline shape of utilisation cells and carbon fuses that are available within the glow impacted quarter. At something time, warm tint is available, the disengaged layer has been exchanged off. Clean furthermore, wonderful varieties of waste which may additionally exist in closeness to the device being produced can corrupt. Crushing, slicing moreover, debarring of various metals, as an instance, assistant (carbon) metallic which then suddenly contacts the littler scale wrapped up floor can start disintegration earlier than advancement is even wrapped up.

No metals may be in bona fide thermodynamic regulate with air at room temperature, which suggests that once metals were displayed to oxygen, a skinny movie of oxide will cover the surface. The protecting layer called the idle film molded at the floor of the chrome steel is the aspect that gives it its “stainless” belongings. It can define as soon as the floor is introduced to an oxidizing circumstance. Along these strains of the disengaged movie, stainless steels are a great choice for framework whilst thinking about use in seawater, compound places of work, beneficial gadget, et cetera. Jiang et al (2017), thru the device for potentiostatic polarization, found that the thickness, resistance and transporters’ thickness of the disconnected film, all extended with time. The direction of movement of the uninvolved motion photographs on stainless steels and stated that the latent movie is by no means static. They determined that the improvement and deterioration of the film is related to the earth to which they may be found out. The most fundamental parameter for the safety of a dormant film is the time required to respond to an herbal trade.

The extension of chromium to a composite containing iron causes the shape traits of the separated film to addition and slope toward an unclear state. The movie itself is to an exceptional diploma thin, under five nm. Single particle impingement for estimate of breaking down stronger disintegration on 304 stainless steel. In the midst of the check, the thickness of the uninvolved movie become measured with an occasion light shaft and become seen to be 2 nm.

The respectability of the uninvolved movie may be measured through electrochemical checking out in order to be illuminated inside the accompanying vicinity.

Generally, aqueous solutions contained its pH value. The value of pH value will affect the equilibrium potentials. According to Bardal (2004), a pH potential diagrams which frequently name with Pourbaix Diagram has been presented by Marcel Pourbaix. The purpose of the diagram is a significant implement to determine the possibility of corrosion. Pourbaix diagrams allow selecting the usage direct of a metallic in water recreation plans i.e. the direction of electro-engineered techniques and the amicability kingdom of the steel at specific cathode ability in a water recreation plan at a selected estimation of PH.

It irrefutably sounds appalling for our companion Fe: unsure in water, paying little heed to what the pH or potential. Adequately given time, it’s going to all exchange into rust. Regardless, press (and other dynamic metals) can crumble, or can be offset towards disintegration, structured upon the situations. Since our human boost is depending on the usage of dynamic metals, for example, Fe, Al, Zn, Ti, Cr… In every manner that sincerely matters everything, it’s far fundamental to fathom this, and we will do for that reason by using implying the Pourbaix diagram.

The disintegration of iron (and other dynamic metals, as an example, Al) is for sure short in parts of the Pourbaix diagram where the phase is oxidized to a dissolvable, ionic aspect, as an example, Fe3+(aq) or Al3+(aq). Regardless, solids, as an example, Fe2O3, and specially Al2O3, shape a guarded overlaying at the steel that fundamentally discourages the disintegration reaction. This contemplate is called passivation.

Stainless steels do not erode at a perceptible charge. Setting an instance of a chrome steel in an electrolyte and measuring the weight loss after a particular time frame could be illogical as the time it takes to get a quantifiable weight reduction will be excessively long. Along those traces, erosion thinks approximately now depend on electrochemical trying out that is ideal to analyse the procedure due to its electrochemical conduct. Electrochemical assessments are finished to present an estimation of consumption resistance and that price of abrasion. An outer strength deliver is associated with a metallic instance and a capability is connected to build the response rate as needs are. The gift thickness is an immediate estimation of the reaction price and in view that it is linked exponentially to the linked potential, a slight trade in capability can construct the response price by a few requests of greatness.

Meaning it’ll decrease the degree of time required to accomplish comes approximately for consumption rate. A commonplace electrochemical intake takes a look at will contain three cathodes, the counter terminal, check anode, and the reference cathode, which are altogether submerged in an electrolyte. The potentiostat is applied to control the capability of the test cathode (living proof). Current is drawn from the potentiostat, which adjustments the test terminal ability from its open circuit capacity to a potential esteem this is controlled through the extent of the potentiostat contemporary. The counter cathode is applied to maintain the tools and anode electrically independent; that’s finished by means of drawing cutting-edge from the take a look at the terminal and offering to the counter cathode in the interim forward and backwards. The reference terminal stipulates a reference point for the progressing estimations as there is no electric cutting-edge streaming amongst it and the potentiostat. The check anode capacity is can be changed according to with the specified sum making use of the reference terminal by using the giving input to the potentiostat.

 

Counterface:

Zirconia Ceramic with 1200 VC (Vickers Hardness)

Stainless Steel (10-12mm Dia):

316L

It is realized that the formability and imperviousness to erosion, austenitic are the most comprehensively utilized review of stainless steel (Sheedy 1994). The three stabilizers which include in the passivation in the stainless steel are Ni, Mn and N. For this situation, it is found that those three segments can be gotten in the 316L. Stainless Steel 316L have a place with austenitic steel which are, it contained high contained of chromium and nickel, and low levels of carbon.

5 % Sodium Chloride (NaCl)Solution

The present the electrolyte course of action (NaCl) in the tribo-electrochemical mechanical assembly is going about as dangerous response for the stainless steel 316L and 253MA, 3.5% of Sodium Chloride has been use together with the tribo-electrochemical device. Electrolyte going about as a fundamental need for electrochemical disintegration. According to Sheedy (1994), electrolyte conducts metal particles a long way from the metal surface so it prepared to join with oxygen to casing more oxides.

Type of Abrasive Particles	Size  (µm)	Vickers Hardness (HV)
Quartz	26	60
Ceramic Bead	40	15
Garnet	28	48
Silica Sand	30	10

As extraordinary exactness and hardness of unpleasant particle will impact the electrochemical usage on the 316L chrome steel at specific widespread weights. Common weights might be related and 4 differing scratched sector debris used as a piece of the tribe-electrochemical check settle in the 3-body-scratched territory utilisation assessments. Research turned into carried out on the effect of essential manner parameters at the rate of cloth degradation inside the area or tri bio-corrosion. Tribocorrosion may be before everything related to the nearness of a careful oxide layer referred to as the unapproachable film on a floor of material which challenges to wear and the modifications of those surfaces purpose by way of rubbing or some different kind of mechanical stacking. Tri biocorrosion considers the substances residences, floor modifications and electrochemical reactions with grinding and wear.Besides, Wood communicated that tribocorrosion usually defined into two types of social affairs which might be breaking down and scratched spot disintegration.

This mission will pay attention at first glance investigation of two particular reviews of stainless steels beneath tribo-erosion situations. The tribo-intake test repair as determined in Figure xx could be applied. A hard creative counter face is applied as a part of conjunction with various grating debris retaining in thoughts the quit intention to recreate tribo-erosion situations on the examples. Tests might be rubbed via the particles underneath comparative load situations for a length while looking the electrochemical facts. The electrochemical estimations will include of OCP (ability as opposed to time chart) and potentiostatic exams (present day as opposed to time diagrams). These estimations will take a gander on the disintegration of the aloof film.

Amid the number one semester of this designing project, association for the trial phase of the task were finished through diary articles and route readings. They filled in as the establishment for taking within the theme of erosion and tribo-consumption. Additionally studies can be required mainly within the electrochemical side of intake as the comprehension of it became not good enough.

Amid the subsequent phase of the designing venture in Semester 2 of 2017, next to conducting the reduce examples, the tribo-erosion checks might be started. Few tribo-erosion exams had been completed this semester, however they just stuffed in as a prologue to the examination and gave a advanced comprehension of the project. There is not sincerely a confined degree of assessments to check, as there may be all that might possibly be wished stainless steel material on hand and the greater assessments completed will deliver a greater exhaustive exam.

List of suggested electrochemical test are tabulated as follows-

Test	Grade	Load (N)	Abrasive
1	316L	0.5	Silica sand
2	316L	0.5	Ceramic beads
3	316L	2	Ceramic beads
4	316L	0.5	Garnet
5	316L	0.5	Quartz
6	253MA	0.5	Silica sand
7	253MA	0.5	Ceramic beads
8	253MA	2	Ceramic beads
9	253MA	0.5	Garnet
10	253MA	0.5	Quartz

References

Stachowiak, Grazyna B., Mobin Salasi, William DA Rickard, and Gwidon W. Stachowiak. “The effects of particle angularity on low-stress three-body abrasion-corrosion of 316L stainless steel.” Corrosion Science 111 (2016): 690-702.

Stachowiak, Grazyna, Mobin Salasi, and Gwidon Stachowiak. “Three-body abrasion corrosion studies of high-Cr Cast irons: benefits and limitations of tribo-electrochemical methods.” Journal of Bio-and Tribo-Corrosion 1, no. 1 (2015): 1-15.

Giourntas, Lampros Gerasimos, Frazer Brownlie, Georgios Karafyllias, Trevor Hodgkiess, and Alexander Galloway. “Effect of corrosion on abrasive wear in a range of materials.” In 23rd International Conference on Fluid Sealing 2016, pp. 171-182. 2016.

Wood, Robert JK, and Mandar R. Thakare. “Abrasion-Corrosion of Thermal Spray Coatings.” In Thermal Sprayed Coatings and their Tribological Performances, pp. 88-120. IGI Global, 2015.

Wan, Weicai, Ji Xiong, Zhixing Guo, Limei Tang, and Hao Du. “Research on the contributions of corrosion, erosion and synergy to the erosion–corrosion degradation of Ti (C, N)–based cermets.” Wear 326 (2015): 36-43.

Xiao, Huaping, Shuhai Liu, Deguo Wang, and Yu Chen. “Abrasion-corrosion behaviors of steel-steel contact in seawater containing abrasive particles.” Tribology Transactions just-accepted (2016): 00-00.

Wang, Sheng-Hui, Jiaren Jiang, and Margaret M. Stack. “Methodology development for investigation of slurry abrasion corrosion by integrating an electrochemical cell to a miller tester.” Journal of Bio-and Tribo-Corrosion 1, no. 2 (2015): 1-9.

Sadiq, Kamran, Richard Anthony Black, and M. M. Stack. “Bio-tribocorrosion mechanisms in orthopaedic devices: Mapping the micro-abrasion–corrosion behaviour of a simulated CoCrMo hip replacement in calf serum solution.” Wear 316, no. 1 (2014): 58-69.

Andrews, Nicola, L. Giourntas, A. M. Galloway, and Alastair Pearson. “Effect of impact angle on the slurry erosion-corrosion of Stellite 6 and SS316.” Wear 320 (2014): 143-151.

Santos, M. B., W. S. Labiapari, M. A. N. Ardila, W. M. da Silva, and J. D. B. De Mello. “Abrasion–corrosion: New insights from force measurements.” Wear 332 (2015): 1206-1214.

Brownlie, F., T. Hodgkiess, A. Pearson, and A. M. Galloway. “Corrosive wear behaviour of various stainless steel alloys and a Stellite 6 weld cladding.” In 17th Nordic Symposium on Tribology, pp. 1-12. 2016.

Anand, Krishnamurthy, Yuk-Chiu Lau, Paul Mathew, Surinder Singh Pabla, Guruprasad Sundararajan, and Mohandas Nayak. “Erosion and corrosion resistant coatings for exhaust gas recirculation based gas turbines.” U.S. Patent 9,365,932, issued June 14, 2016.

Prozhega, M. V., N. A. Tatus, S. V. Samsonov, O. Yu Kolyuzhni, and N. N. Smirnov. “Experimental study of erosion-corrosion wear of materials: A review.” Journal of Friction and Wear 35, no. 2 (2014): 155-160.

Szyma?ski, Krzysztof, Adam Hernas, Grzegorz Moskal, and Hanna Myalska. “Thermally sprayed coatings resistant to erosion and corrosion for power plant boilers-a review.” Surface and Coatings Technology 268 (2015): 153-164.

López, Diana Maria, Neusa Alonso Falleiros, and André Paulo Tschiptschin. “Use of Electrochemical Tests for Assessment of the Effect of Erosive Particle Size on the Erosion-Corrosion Behaviour of AISI 304L Austenitic Stainless Steel.” Materials Research AHEAD (2016): 0-0.

Wang, Zhenguo, Yan Li, Weijiu Huang, Xiaoli Chen, and Haoran He. “Micro-abrasion–corrosion behaviour of a biomedical Ti–25Nb–3Mo–3Zr–2Sn alloy in simulated physiological fluid.” Journal of the Mechanical Behavior of Biomedical Materials 63 (2016): 361-374.

Giourntas, L., Trevor Hodgkiess, and A. M. Galloway. “Comparative study of erosion–corrosion performance on a range of stainless steels.” Wear 332 (2015): 1051-1058.

Hayes, A., S. Sharifi, and M. M. Stack. “Micro-abrasion-corrosion maps of 316L stainless steel in artificial saliva.” Journal of Bio-and Tribo-Corrosion 1, no. 2 (2015): 1-15.

Katiyar, Prvan Kumar, Prince Kumar Singh, Rityuj Singh, and A. lava Kumar. “Modes of failure of cemented tungsten carbide tool bits (WC/Co): A study of wear parts.” International Journal of Refractory Metals and Hard Materials 54 (2016): 27-38.

Shellis, R. Peter, and Martin Addy. “The interactions between attrition, abrasion and erosion in tooth wear.” In Erosive Tooth Wear, vol. 25, pp. 32-45. Karger Publishers, 2014.

Kusumoto, Kenta, Kazumichi Shimizu, Xinba Yaer, Hiroya Hara, Kazuhiro Tamura, and Hideki Kawai. “High erosion-oxidation performance of Fe-based Nb or V containing multi-component alloys with Co addition at 1173K.” Materials & Design 88 (2015): 366-374.

Pillai, Raju, Jiinjen A. Sue, and Parul W. Dhall. “Laser cladding Fe—Cr alloy on downhole tools.” U.S. Patent 9,382,596, issued July 5, 2016.

Monteiro, Othon R., Sankaran Murugesan, Radhika Suresh, and Valery N. Khabashesku. “Corrosion-and Erosion-Resistant Metal Matrix Nanocomposite Coatings for the Oil and Gas Industry.” In SPE International Oilfield Corrosion Conference and Exhibition. Society of Petroleum Engineers, 2016.

Kamdi, Zakiah, P. H. Shipway, and K. T. Voisey. “Micro-Scale Abrasion of WC-Based Coatings with Different Abrasive Type.” In Applied Mechanics and Materials, vol. 465, pp. 65-69. Trans Tech Publications, 2014.

Bubbico, Roberto, Gian Piero Celata, Francesco D’Annibale, Barbara Mazzarotta, and Carla Menale. “Experimental analysis of corrosion and erosion phenomena on metal surfaces by nanofluids.” Chemical Engineering Research and Design 104 (2015): 605-614.

Casesnoves, Francisco, Maksim Antonov, and Priit Kulu. “Mathematical models for erosion and corrosion in power plants. A review of applicable modelling optimization techniques.” In Power and Electrical Engineering of Riga Technical University (RTUCON), 2016 57th International Scientific Conference on, pp. 1-11. IEEE, 2016.